How To Make Plastic Beads

Download Article

Download Article

Bracelets can be fun and like shooting fish in a barrel to make. People of all ages can make them, even children. This commodity volition show you how to make elementary bracelets using elastic and beads. It volition also testify you lot how to brand a more circuitous bracelet using wire, crimp beads, and clasps.

1. i

   Consider using elastic if you are a beginner. These sorts of bracelets are fun, and piece of cake to make. You lot simply put the beads onto the cord and knot it. Yous do not need a clasp. To acquire how to make a stretchy beaded bracelet, click here. You tin buy beading rubberband in a bead shop, or in the beading section of an craft store.

   • Clear elastic thread comes in many unlike thicknesses. Thicker elastic is sturdy, which makes it suitable for big beads. Thinner rubberband is more delicate, and looks best paired with smaller beads.
   • Elastic cords have a thread or fabric covering. They are thick by beading standards, and commonly come up in black and white.

2. ii

   Try using wire if y'all are more advanced. Beading wire cannot be tied like elastic, and must be used with crimps and clasps. The crimps assistance hold the bracelet together. Be sure to use beading wire, which is flexible. Wire used for wire wrapping is as well stiff and thick; information technology is not suitable for beading. To learn how to brand a beaded bracelet with a clasp, click here.

   • Consider using memory wire for a fun, screw bracelet.

   Ad

3. three

   Know that some chaplet piece of work better with certain types of string. Smaller chaplet will work well on thin, delicate rubberband. Large beads, notwithstanding, volition demand something heavier, such every bit a thicker elastic or wire. You volition too need to add actress length to your bracelet if you lot are using bulky beads. These beads make full up the space between the bracelet and your wrist, making the bracelet fit tighter.

4. four

   Choose your beads. There are many different types of chaplet. Each fabric has a specific look, and some types of chaplet are more suitable to certain projects than others. Hither are the near common beads y'all volition find in dewdrop store or an craft store:

   • Plastic beads are the to the lowest degree expensive and come in many unlike shapes and colors. They are ideal for kids' arts and crafts. For a fun, child-friendly bracelet, try using elastic string in a vivid colour, and using plastic pony beads. You lot can also use alphabet beads so the kids can spell their names on the bracelet.
   • Drinking glass beads are cute, and come in many different colors. They capture the light well and had a mid-price range. Nearly drinking glass beads will be translucent, and some will have designs.
   • Semi-precious stones tend to be more expensive than glass beads. They besides tend to exist heavier. Considering they are made from natural materials, no 2 beads are alike.
   • Y'all tin too observe beads made from natural textile, such as beat, forest, ivory, and coral. These tend to be expensive and unique; no two chaplet are the aforementioned.

5. 5

   Decide on a design before putting the beads on the elastic or wire. When ownership beads, you may find that the beads are already strung for you. This is just another way of packaging them, and is non suggestive of a final pattern. Only snip the beads off their string and arrange them in a new pattern on your desk or bead tray. Here are some ideas for a design:

   • Put the largest beads towards the heart, and the smallest beads towards the clasps.
   • Alternating large beads with smaller/spacer beads.
   • Use a warm (ruddy, orange, yellowish) or a cool (dark-green, blue, and majestic) color scheme.
   • Cull a agglomeration of chaplet that are all the same color, but in different sizes and shades. For case, you lot could utilise light bluish, medium blue, and night blue beads.

6. half-dozen

   Consider getting a bead tray. Yous can find them in bead shops or in the beading department of an craft store. They unremarkably come in greyness, and have a velvety texture. They accept necklace-shaped groves with measurements. This allows beaders to lay out their pattern and see what their necklace or bracelet may look similar before they put the beads on the string.

Advertizing

1. one

   Assemble your supplies. Stretchy bracelets are the easiest to make, and require the fewest tools. You tin make a simple, child-friendly one using elastic string and plastic pony beads. You can too brand a dainty ane using clear elastic and drinking glass beads. Here is a list of what you volition demand:

   • Beading elastic or cord.
   • Chaplet
   • Scissors
   • Record or binder clip
   • Super glue

2. 2

   Measure your wrist and cut the rubberband a piddling fleck longer. Have the beading rubberband and wrap it one and a half times around your wrist. Cutting information technology with a pair of sharp scissors. Y'all are making it slightly larger so that you tin can knot it afterwards.

3. 3

   Stretch the elastic. Hold the elastic between your fingers and stretch it gently. This will prevent the elastic from stretching out later on and creating gaps.

4. 4

   Fold some tape over i of the ends of the rubberband. This will prevent the beads from sliding off while yous piece of work. If you practice not take any record, or if the tape won't stick, employ a binder clip instead.

5. 5

   Put the chaplet onto the rubberband. You lot do not need a needle for this; most elastic is potent enough that you tin can put the bead directly onto the string. Concord the elastic close to the end, and slip the chaplet on.

   • Try to put the dewdrop with the largest hole on first. In one case you cease the bracelet, you lot can hide the knot by sliding it under that bead.

6. 6

   Keep adding chaplet until you take the length you lot want. Be sure to wrap the bracelet round your wrist from time to fourth dimension. The first and last bead should exist touching, and the bracelet should exist somewhat loose. You do not want it to stretch effectually your wrist. If you run into whatever gaps or cord, you will need more chaplet.

7. vii

   Take the tape or clip off, and necktie a foursquare/surgeon knot. Start by folding the two ends of the rubberband over and under each other, like tying a pair of shoes. Tie another knot similar it but don't tighten it yet; you will have something that looks similar a ring. Wrap one of the tail ends effectually one side of the circle. Do the aforementioned thing for the other side. Now y'all can tighten the knot.^[1]

8. viii

   Try to slide the knot under one of the adjacent beads. This volition decide how you cease off the bracelet. Be sure to accept a bottle of super glue fix.

   • If you can slide the knot under ane of the beads, trim off the actress string and put a drop of mucilage over the knot. Slide the knot nether the bead.
   • If you can't fit the knot nether one of the beads, tuck the tail ends inside the beads instead. Put a drop of gum on summit of the knot to seal it.

9. 9

   Wait for the glue to dry before wearing your bracelet. If you try to put the bracelet on as well soon, the knot may loosen and the mucilage may fissure. Most glues will dry in almost fifteen minutes, and cure afterwards 24 hours; refer to the label for more exact drying times.

Advertisement

1. 1

   Get together your supplies. Clasped bracelets are more than advanced than stretchy bracelets. You lot will demand boosted tools and supplies in order to terminate one. Here is a list of what you lot will demand:

   • Beading wire
   • Squeeze and hook
   • 2 crimp chaplet
   • 2 seed beads
   • Beads
   • Wire cutters
   • Needle nose pliers
   • Tape or binder prune

2. ii

   Measure your wrist with a measuring tape and add 5 to 6 inches (12.seven to 15.24 centimeters). Y'all are making the bracelet longer so that you can finish it. You also want the bracelet to exist somewhat loose, or it won't be very comfortable. Lastly, you are calculation extra length because some beads add more than majority than others.^[two]

3. iii

   Use wire cutters and cut some beading wire co-ordinate to that length. Y'all desire to apply a soft, flexible wire. Exercise not the stiff kind meant for wire wrapping. Y'all can observe beading wire in a bead shop or in the beading section of an arts and crafts store. It usually comes on a flat, disk-shaped spool.

4. iv

   Wrap some record around ane of the ends of the wire. You are doing this so that you tin string the beads on without losing any. If you don't have any tape, you tin can use a binder prune instead.

5. 5

   Consider laying out your pattern on a beading tray. If you do not have a beading tray, lay your pattern downwards on a table, right next to the measuring record. This will allow you to determine how many beads you will need for your design. If y'all are doing a simple design (such as two altering colors) or a random design, you do non need to practice this.

6. half dozen

   Put the beads onto the wire. Once you lot have decided on your pattern, showtime putting the beads onto the wire. Yous do not need a needle for this. Simply hold the wire close to the finish, and starting time popping the beads on. Exist sure to measure against your wrist from fourth dimension to fourth dimension; big beads will add majority, so y'all may need to brand the bracelet longer to make it fit.

7. 7

   Stop off past putting on a crimp bead, a lard seed bead, and ane function of the clasp. Once you have all of the chaplet on the wire, put on a crimp dewdrop, and so a seed dewdrop, and finally a clasp. Information technology does non matter which part of the clasp you put on showtime.

   • You tin can apply any type of squeeze. A spring or lobster-claw clasp is the most traditional, but a magnetic ane may make the bracelet easier to take on and off.

8. 8

   Thread wire back through seed bead and crimp, making a loop. The clasp should be hanging off of the meridian of the loop.

9. ix

   Gently slide the crimp and seed dewdrop towards the clasp. You want them to be snug, only withal loose enough and then that the squeeze tin still jerk. Get out almost an inch (2.54 centimeters) long tail on the wire.

10. 10

    Use a pair of needle olfactory organ pliers to compression the crimp dewdrop. Exist sure to pinch the bead tightly. The crimp is your "knot," and then it needs to be secure. Gently tug on the wire. If information technology moves, pinch the crimp bead tighter. Practice not trim the tail off.

11. eleven

    Plow the bracelet upside down and tuck the tail into the beads. The chaplet volition slide downwardly towards the crimp and squeeze. Constrict the tail into those offset few beads, hiding information technology. Accept off the tape or binder clip from before.

12. 12

    Repeat the process for the other end of the wire, just don't pinch the crimp yet. Put on a crimp bead, a seed dewdrop, and the other part of the squeeze. Thread the wire back through the seed bead and crimp. Gently tug on the tail until the chaplet are affluent with the clasp.

13. 13

    Attempt the bracelet on and brand whatever adjustments, if necessary. If the bracelet is too big, you will demand to take off a few beads. If the bracelet is too small, yous will need to add together some more than chaplet. To do this, simply pull the clasp, seed bead, and crimp off, and so make the adjustments. Be sure to replace the crimp, seed dewdrop, and squeeze one time everything fits.

14. 14

    Pinch the crimp dewdrop with a pair of needle nose pliers and tug gently to examination the tension. If you see things shifting a piffling, only compression the crimp harder.

15. 15

    Thread the tail through 2 to three beads and snip off any backlog wire. Press the flat side of the wire cutters against the dewdrop and advisedly snip off the read of the tail.

Advertisement

1. 1

   Get together your supplies. Multi-strand bracelets are fun to make. Yous brand all strands using the aforementioned blazon of dewdrop, but in dissimilar colors. You can likewise make each strand using a different type of bead. Seed beads are great for this type of bracelet. Here is a list of what you will demand:

   • Beading thread
   • Beading needle
   • Beads
   • Bead tips (also called dewdrop clamps, mollusk shells, bead ends, or string tips)
   • 2 spring rings
   • Clasp and hook
   • Needle nose pliers
   • Scissors
   • Super glue

2. ii

   Measure your wrist and add ¼ to 1 inch (0.64 to ii.54 centimeters). This will permit the bracelet to hang loosely around your wrist. This will give you the length of your finished bead strands.

3. 3

   Cutting two pieces of thread that are twice the length of your measurement. You will be folding them in one-half in a subsequently step. This will make one beaded strand.

4. 4

   Hold the ii threads together, fold them in half, and necktie a large knot near the elevation of the loop. Y'all will desire nearly two to four knots. Don't worry if they expect messy; you volition be hiding them. Y'all should cease up with a big knot and iv strands of thread coming out of it. This will make the bracelet more durable.

5. 5

   Place a driblet of super mucilage onto the knot and fold a bead tip over it. Yous tin use your fingertips or a pair of needle nose pliers to close the bead tip. The loop on the bead tip should be on the same side as the short, extra ends of your thread. Yous volition trim them off later.

6. half-dozen

   Put all 4 strands of the thread through a beading needle and start stringing your chaplet. Keep stringing until the bracelet is a piffling bit shorter than you want it to be.

7. vii

   Take the needle off the thread and necktie a few knots close to the last bead. Don't necktie the knot too close, however, or yous volition put too much pressure on the thread. Try to leave a small gap between the knot and dewdrop.

8. 8

   Place a drib of mucilage onto the knots and fold a dewdrop tip over them. You can utilise your fingertips or a pair of needle nose pliers to close the dewdrop tip. The loop of the bead tip should be facing abroad from the beads.

9. 9

   Repeat this procedure to create as many strands as you lot want. When y'all finish all of your strands, lay them out side by side in an lodge that you find visually pleasing.

   • If you'd adopt a "tangled" wait to your finished bracelet, interweave your strands rather than keeping them separate.

10. 10

    Open ii jump rings using a pair of needle nose pliers. Hold a jump ring with your fingers and a pair of needle nose pliers. The cutting role of the leap ring should be betwixt your fingers and the pliers. Hold the band tightly with the pliers, then move your fingers away from you. The jump band volition twist open up. Repeat this step for the other jump ring.

11. 11

    Put 1 function of the clasp and the beaded strands onto ane leap band. Hold the spring band with the needle nose pliers, and slip the clasp and beaded strands onto the ring. Only one end of the beaded strands should be on the spring ring. The other ends of the strands should exist hanging freely.

12. 12

    Shut the jump ring. Still belongings the jump ring with the pliers, take concur of the band with your fingers. Move your hand towards yous, twisting the ring close.

13. 13

    Repeat the process for the other clasp and the other terminate of the beaded strands. Sideslip the clasp onto the other jump ring, along with the strands. Close the bound ring.

Advertisement

Add New Question

• Question

  How practice I judge the size of the wire, thread, beads and end clasps?

  

  Wrap the wire and thread around your wrist to examination the length.

• Question

  How do I string disc beads with a pigsty in the center, and get them to lay flat?

  

  You can't. The nature of those beads makes it impossible for them to lay flat.

• Question

  How many beads does information technology take to brand a bracelet?

  

  Information technology depends on how big the person'southward wrist is and how large the chaplet are. Measure the person's wrist if possible and then put beads on the string until it reaches the correct size.

Meet more answers

Ask a Question

200 characters left

Include your electronic mail address to get a bulletin when this question is answered.

Submit

Advertisement

Video

Things You'll Need

• Beading rubberband
• Beads
• Scissors
• Tape or binder clip
• Super glue

• Beading wire
• Clasp and hook
• 2 crimp beads
• 2 seed beads
• Chaplet
• Wire cutters
• Needle nose pliers
• Tape or binder clip

• Beading thread
• Beading needle
• Beads
• Bead tips (as well called bead clamps, clam shells, bead ends, or cord tips)
• 2 jump rings
• Clasp
• Hook
• Needle nose pliers
• Scissors
• Super glue

• It is always better to cut the elastic or wire besides long. Yous can ever shorten it. If yous cutting something as well short, you lot will need to start over; you cannot make wire or elastic longer.

• Try making several beaded bracelets and wearing them together for a boho-chic wait.

• Make many bracelets and give them away every bit gifts or sell them online or at craft fairs.

Thanks for submitting a tip for review!

Advertizing

• Do non leave young children and beads unattended. Young children may mistake bright beads for candy and swallow them.

Advertisement

Nearly This Article

Article Summary 10

To make a beaded bracelet, start by cutting a piece of elastic that's 1.five times longer than your wrist. Adjacent, fold a piece of tape over the end of the rubberband to foreclose the beads from falling off. One time information technology's secure, add chaplet until at that place are enough chaplet to wrap around your wrist. When you're washed calculation chaplet, have off the tape and necktie a foursquare knot with the the ends of the rubberband. For tips on calculation a clasp to your beaded bracelet, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 527,338 times.

Did this article help you?

Source: https://www.wikihow.com/Make-a-Beaded-Bracelet

Posted by: millerthereapt97.blogspot.com

Share this post